Does any one know where to get Ramsey winch parts in Sydney?
I need a new plug socket for a 12 year old 9000lb electric.
Thanks,
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ramsey winch parts
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Ramsey winch parts
Damian.
should I swim it first ?
should I swim it first ?
don't know about getting them here, but Ramsey USA are very helpful and a phonecall or email will have one in the mail to you pretty good - their winches are ordinary but their customer service is excellent.
I am reasonably confident the old 4-pin warn winch controllers are the same, and last time I was at the auctions, they had dozens of 4 pin controllers lying around.
failing those options, I would ditch the plug and the socket and replace them with a 6 pin trailer plug and socket - under $20 from supercheap and an immediate solution. there's any number of different plug/sockey combos you could use.
alternatively, or in addition to any of the above, you could run some wires up into the cab to a rocker switch on the dash or even the door armrest so you can drive the winch from in the car. ten bucks for wire and a switch from dick smiths and an hour of mucking around.
as a last resort, I think I actually have one of those ramsey controllers, it was working when it was last used. I'll dig it up if you want it.
cheers
Brian
I am reasonably confident the old 4-pin warn winch controllers are the same, and last time I was at the auctions, they had dozens of 4 pin controllers lying around.
failing those options, I would ditch the plug and the socket and replace them with a 6 pin trailer plug and socket - under $20 from supercheap and an immediate solution. there's any number of different plug/sockey combos you could use.
alternatively, or in addition to any of the above, you could run some wires up into the cab to a rocker switch on the dash or even the door armrest so you can drive the winch from in the car. ten bucks for wire and a switch from dick smiths and an hour of mucking around.
as a last resort, I think I actually have one of those ramsey controllers, it was working when it was last used. I'll dig it up if you want it.
cheers
Brian
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 1 guest