Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Are my valve springs toast?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Are my valve springs toast?

Post by Hybrid »

I've had a rebuilt commo V6 sitting under the house for over a year now. I have only turned it over a handful of times whilst tinkering. One of the guys mentioned the other day the the valve springs might be stuffed from being compressed all this time. What is the likelyhood of this being true. And if so if I run it as is am I gonna burn my valves out or worse?

John
Top
Posts: 1494
Joined: Mon May 24, 2004 5:21 pm
Location: Bris, or under the sea

Post by Going_up »

run a compression test on the cylinder,
or take off the rocker cover and check the clearances ofter turnong it over a few times,
if it's rebuilt and not had muck work done, it should be rite
If at first you dont succeed... Skydiving is not for you!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

I doubt you'll have a problem.

I recently rebuilt a '62 Buick V8 that hadn't been run in at least 10 years, all the springs were within spec when it came apart.

does the commodore V6 run hydraulic lifters?
Free air locker to the first 20 callers!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests