Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spring Over
Spring Over
How hard is it to do a spring over on a SWB MQ?
God of Magnificant Ideas!
Just a basic SOA should take a weekend to do ........
Mind you if you are doing a knuckle twist on the front diff to alter/correct castor angle then add another day !
A good workshop is pretty essential, Mig & arc welder, oxy, 9" + 4 " grinders, tressels, large floor jack, car stands, all help. A lathe will be handy for driveshaft lengthening but this is better done at a specialists shop.
As above, the bible has plenty of good reading, but dont forget to ask the questions you need before ya start.
Once done you wont go back
Kingy
Praise the lifted
Mind you if you are doing a knuckle twist on the front diff to alter/correct castor angle then add another day !
A good workshop is pretty essential, Mig & arc welder, oxy, 9" + 4 " grinders, tressels, large floor jack, car stands, all help. A lathe will be handy for driveshaft lengthening but this is better done at a specialists shop.
As above, the bible has plenty of good reading, but dont forget to ask the questions you need before ya start.
Once done you wont go back
Kingy
Praise the lifted
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Who is online
Users browsing this forum: No registered users and 3 guests