Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

New Rodeo.

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

New Rodeo.

Post by Westoztroopa »

New Rodeo is due out in March.
Interesting that the torsion bar independent front setup is being replaced with independent coils... Gotta be an improvement.

Image

http://www.holden.com.au/www-holden/jsp/chooseavehicle/popups/rodeo_popup.jsp
Posts: 44
Joined: Sat Dec 07, 2002 10:16 am

Post by Greazy »

This can only mean good things for the Jackaoo as well!!!!! or at least after market conversions. Lets hope the idea for a Gen III V8 Jacka continues but with a the Gen IV that they are developing and the new coils - What a weapon :shock: :D
Life is for my own to live my own way......
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

It would be nice to think so Greazy, but the Jackaroo has been a pretty poor seller for Holden for years now unlike the Rodeo which is still up there in the utility market. Isuzu 4x4 production is winding down in Japan but I believe that the new Rodeos are to be produced in Thailand.

The end of the Jackaroo is nigh... :cry: :cry: :cry:

Noel
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Yep, the end of the Jack is nigh. Suppose to be replaced by the Ascender. Which looks like a Chev S-10 sorta thing. Looks like the HEUI 3.0TD Is a gonner too. Maybe they will bring it out in the F'terra....

Like the Rodeo though. Wonder if the front end bits will fit the F'terra as the chassis is very simular....
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Had a look at the New Rodeo yesterday and found torsion bar independant front end. The chassis looks identical to the old R8 model.
Bugger no coil conversion for the Fterra!!!!!!

M<aybe the LT Sport has them?????
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

"If you want economy and don't need the power of a big V6, the new Rodeo also comes with a handy 2.4 litre petrol engine on all 4x2 DX models. This 4 cylinder Rodeo offers 94Kw at 4,800rpm and a handy 207Nm at 3,200rpm. While economical, it can still handle large loads. Best of all, Rodeo is the only truck in its class with coil spring independent front suspension. This system provides the 4x2 DX with car-like ride and handling."

May have mis-read it slightly. Looks like only the 4 cylinder gets the coils.
Would probably be a bit light weight for conversion to the V6... but worth looking at.

Noel
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Must be only the 4X2 not the 4X4s with coils......... BUGGER!!!!!!

Will have a look at one and see what it's like...
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest