Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
oil capacities - bundera diff
Moderators: toaddog, Elmo, DUDELUX
oil capacities - bundera diff
Can anyone tell me the factory oil capacity of a bundera front end diff??
cheers
cheers
how do you guys fill your diffs / gearboxes if you dont have access to hoists?
I have only filled up diffs on the hoist from big 500ltr barrels that have oil pumps fitted...
I would like to replace my bundies diff / transfer / box oils, but yeh, need to know what you guys are using if changing it while on the floor.
I have only filled up diffs on the hoist from big 500ltr barrels that have oil pumps fitted...
I would like to replace my bundies diff / transfer / box oils, but yeh, need to know what you guys are using if changing it while on the floor.
cplux I just filled my rear diff and it used 2L almost exactly I couldn't find the volume for the front or the rear so I would say 2L.
As for filling the diffs I bought a $2 funnel that has a bendable end from a parts store (you can get em from repco and autobarn ect.ect) and I have connected a 2m length of garden hose to the end of the funnel.
I then have a small piece of copper pipe at the end of the hose which fits into the filler hole easier (and lets the air out so it doesn't go back up the hose).
Just put the funnel a couple of meters above where the diff/gearbox sits and let gravity do the work.
As for type of oil, I just use Valvoline SAE 90 (top shit)
Hope it helps,
Regards,
Nick
As for filling the diffs I bought a $2 funnel that has a bendable end from a parts store (you can get em from repco and autobarn ect.ect) and I have connected a 2m length of garden hose to the end of the funnel.
I then have a small piece of copper pipe at the end of the hose which fits into the filler hole easier (and lets the air out so it doesn't go back up the hose).
Just put the funnel a couple of meters above where the diff/gearbox sits and let gravity do the work.
As for type of oil, I just use Valvoline SAE 90 (top shit)
Hope it helps,
Regards,
Nick
Who is online
Users browsing this forum: No registered users and 8 guests