Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series intercooler

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 68
Joined: Sun Aug 17, 2003 10:32 pm
Location: Melbourne

80 series intercooler

Post by Eric »

Hi all . Fitting a turbo to my 4.5 landcruiser next week and want to run the intercooler . has anyone here acheived that whilst running dual batteries ? The donar vehicle set up ,the pluming comes through were my battery sits , i was thinking of cutting the inner guard , but thought to ask here first.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday Eric
Are you fitting it to a 100 or an 80? If a 100, go to lcool classifieds, and ask Paul Aadvark, as he put a turbo with intercooler on his 100.
If u r putting it on an 80, u will have to loose the battery or run the return to the motor a different way, as in through the inner guard.
Andrew
Posts: 68
Joined: Sun Aug 17, 2003 10:32 pm
Location: Melbourne

Post by Eric »

its for the 80 . so looks like through the inner guard it is
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday Eric
Might be easier to use a smaller aux battery and cut the battery cradle down, or run it in the rear of your cruiser if u have storage compartment there behind wheel arch pass side.
Are you transplanting whole motor? If not, you will need a 3/8 BSP plug for oil return hole in sump on old, and drill new in new.
Andrew
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest