Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What Carby to use?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 53
Joined: Wed May 05, 2004 4:20 pm
Location: PIMPIN'

What Carby to use?

Post by a187luv »

At the moment I'm running a 4 barrel holley on a 253 holden, duel fuel. I'm getting an Electric Dizzy installed today as my previous vacume dizzy has no advance.

She farts (backfires) around so much, it's driving me crazy. this happens even when i've run all the fuel out the carby b4 switching to gas. maybe a leak in the carby???


My mechanic says to change the carby to a Rochester 4 barrel with teh smaller primaries.

I've also been told a 2 barrel stromberg would be better.


she is my daily driver, and i'd like to run her on gas mostly. any ideas from anyone with similar setups?? Thanx
Pimpin', it ain't easy but it sure is fun
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

G'Day mate,

I have just taken a 4 barrel 'Aussie' Rochester off my 253 V8 to go EFI :cool:

I also have the original 2 barrel stromberg (which I took off to run the Rochester :D )

I had the 253 with electrnic dizzy and the Rochester on an edelbrock performer manifold. It was a good setup. But I like the reeeeeally steep stuff, which no carby likes :D .

Dont get me wrong, the Rochester will do 99% of what you want, but for competition, I am going EFI !

So, if you wanna talk 'turkey' on the Stromberg (which is still on the original 253 manifold) or the Rochester (which was setup for the 253 :cool: ), PM me :armsup:

Dan
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

carby

Post by Mechman »

hey Shorty...

i have the original strom on my 253. i am pleased with the fuel econ so far. what did it cost you to swap to the EFI?

do you rate teh rochester over the strom?... how does the fuel use compare?

mine is also my daily drive...

thanks mate
ohhhhh shite... it really didnt look that deep!
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

The EFI swap has cost me 2 - 3 months of searching to find all the bits to convert it :roll: :lol:

Holley wanted nearly 2 grand for the setup - then I would have had to pay for the install :shock:

Not sure about fuel consumption - but offroad and onroad performance were SIGNIFICANTLY better :cool: The Rochester is/was better in all ways ! Having driven both I would say the QJet wins hands down ;)

I cant wait to see what the difference is with EFI :cool:
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

carbbie

Post by Mechman »

"Having driven both I would say the QJet wins hands down"
umm, whats a QJet?
ohhhhh shite... it really didnt look that deep!
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

The Rochester - Q Jet is a quadrajet ;)
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Re: What Carby to use?

Post by Camshaft1 »

[quote="a187luv"]At the moment I'm running a 4 barrel holley on a 253 holden, duel fuel. I'm getting an Electric Dizzy installed today as my previous vacume dizzy has no advance.

She farts (backfires) around so much, it's driving me crazy. this happens even when i've run all the fuel out the carby b4 switching to gas. maybe a leak in the carby???


My mechanic says to change the carby to a Rochester 4 barrel with teh smaller primaries.

I've also been told a 2 barrel stromberg would be better.


she is my daily driver, and i'd like to run her on gas mostly. any ideas from anyone with similar setups?? Thanx[/quote]

Unhook the line gas line from the carby, connect it to your BBQ, cook some snags, have a few beers with mates and pnder over how your going to put a turbo diesel donk in your shorty.
Posts: 24
Joined: Fri Nov 14, 2003 9:33 pm
Location: Port Macquarie, NSW

Post by Cory »

for a straight petrol 253 id go rochester or nothing bigger than a 350 holley,

for straight gas, id be talking to a place like gas research.

But I agree with what has been said already with EFI being the way to go.

Cory
former owner of an overlander replica
Posts: 53
Joined: Wed May 05, 2004 4:20 pm
Location: PIMPIN'

Post by a187luv »

thanx guys

the electric dizzy seems to have fixed up the back firing, for the moment anyways.

if that doesn't work too well...i'll go the rochester. or gas research if i decide straight gas
Pimpin', it ain't easy but it sure is fun
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Shorty40 wrote:The EFI swap has cost me 2 - 3 months of searching to find all the bits to convert it :roll: :lol:


TBI?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

2car wrote:
Shorty40 wrote:The EFI swap has cost me 2 - 3 months of searching to find all the bits to convert it :roll: :lol:


TBI?


Yup :cool:

http://www.holley.com/HiOctn/ProdLine/P ... 502-3.html

And an early MOTEC ECU to run it ;)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests