Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I have a broken 5 speed in my MK at them moment (Refer Nissan section) and I am trying to work out what gearbox I have before I pull it out (Waiting for Dad's car to get out of the garage, cracked head ) I was told it is a Cabstar truck 5 speed by the previous owner.
It has a Marks Adaptor between the gearbox and t/case, with MFC100 cast into it. I was wondering if anyone on here would know what this adaptor is for, and hence what gearbox I have.
I tried ringing Marks a couple of times today, but the phone was always engaged and when I did get through they were closed
If you ring marks with that number they should be able to tell you what box that adapter plate was made for. Is the gearbox an aluminium cast from marks as well?
I have 2 marks 5 speed cabstar (Cabul) gear boxes to suit a G60. I think they made a similar one for the MK. Could you let me know either way how you go, cheers.
Thanks guys, I ended up Emailing Marks and then ringing when I didn't get a response (Email response actually came today ) And it turns out the gearbox is out of a Caball or Cabstar. Mark said it sounds like the input shaft is cactus, which is a factory part. Hope it isn't one of the parts Marks made because they don't make them any more.
) I was told it is a Cabstar truck 5 speed by the previous owner.
) And it turns out the gearbox is out of a Caball or Cabstar. Mark said it sounds like the input shaft is cactus, which is a factory part. Hope it isn't one of the parts Marks made because they don't make them any more.