Need the full length the diameter of the mounting face and the bolt patern,
And if you have a hub the distance between the monting faces of the bearings .
Thanks
Larry.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Stub Dimensions.
Moderators: toaddog, Elmo, DUDELUX
Stub Dimensions.
Just wondering If one of you nice yota gurus could measure a lux front stub for me Please
Need the full length the diameter of the mounting face and the bolt patern,
And if you have a hub the distance between the monting faces of the bearings .
Thanks
Larry.
Need the full length the diameter of the mounting face and the bolt patern,
And if you have a hub the distance between the monting faces of the bearings .
Thanks
Larry.
RUFF wrote:I dont have the measurments but what are you trying to fit it to Larry?
Hi Tony ,
Thinking they may be a cheap alternative to the after market bored out ones for the rover diffs , only got bearing sizes so far i have placed them in the rover section ,( any one Gq diffs thread ), seems there is
a possability there ,
Just stumbled across this review and got me thinking http://www.4x4wire.com/toyota/reviews/fullfloater/
Larry.
Who is online
Users browsing this forum: No registered users and 0 guests