Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ZF Auto dimensions

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 287
Joined: Thu May 29, 2003 5:45 pm
Location: Gympie, Queensland

ZF Auto dimensions

Post by auto_eng »

Can anyone tell me the dimensions of a ZF Auto rear shaft? I am after the specs for the section that goes into the LT230 transfer. Diamter, # teeth, tooth depth, length.

I am also after the length of the rear extension housing of the ZF.

Cheers
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Re: ZF Auto dimensions

Post by Strange Rover »

auto_eng wrote:Can anyone tell me the dimensions of a ZF Auto rear shaft? I am after the specs for the section that goes into the LT230 transfer. Diamter, # teeth, tooth depth, length.

I am also after the length of the rear extension housing of the ZF.

Cheers


The zf uses a short spud shaft to adapt to the lt230. So are you after the specs of te ZF by itself or with the spud shaft bolted to the zf output?

Sam
Top
Posts: 287
Joined: Thu May 29, 2003 5:45 pm
Location: Gympie, Queensland

Post by auto_eng »

After spud shaft dimensions. I am trying to see if I can get an LT230 to mate to a Toyota A340 (Crown) automatic gearbox.

My mistake, I thought the ZF mounted straight to the LT230.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 7 guests