Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Travel, front and/or rear?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Travel, front and/or rear?

Post by MissDrew »

How do you like your travel to be setup?

Do you like more rear travel then front or even amounts front to rear? and why?

I like to have front and rear as close as possible as I think it makes for a much more stable and predictable rig.

My lux has approx 21 inch in the front and approx 24 inchs in the rear. When I go to coils in a year or 2 I`ll be trying to get approx 21 to 24 front and rear.
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

Good question,

I've only ever played around on rigs with lots of travel in the rear... can't say from experience, however flex from both front and rear would be more stable I would think.

Steering linkages limits most in the front?
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

I like the balanced feel of my zook with rears all round, it also comes in handy when you want to swap them around. (i.e. when the drivers side sags with me in it)
yeshemesh
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

I didn't have much choice with the Jabber :-
front = 8"
rear = 16"

I think those figures will look a lot better soon :lol:
I just luv my "clacker Jabber"
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

id love for my front end to be on par with the rear
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

witht the setup i have now it is fairly even front and rear and i think that it makes it way more stable and predictable ....
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

Ryan, How much travel are you getting from the front? I think in stock front and back are about equal.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

definetly an even balance, lots more predictable and stable.
Ransom note = demand + collage
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Bitsamissin wrote:I didn't have much choice with the Jabber :-
front = 8"
rear = 16"

I think those figures will look a lot better soon :lol:



9.5" front (IFS)
20" rear
105" wheelbase
60" track f&r

Measured bottom rim-top of wheel arch..

All of a sudden I don't feel so bad :D
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Gary, you keep mentioning those figures but looking at the pics of your truck I just can't see how you would have the room (in up travel) especially at the rear and even the front with those tyres.
How are you measuring those figures ??
They would be extremely long rear shocks to get that sort of travel ??
I just can't see it to be honest........................ :?
I just luv my "clacker Jabber"
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

muppet_man67 wrote:Ryan, How much travel are you getting from the front? I think in stock front and back are about equal.


not as much as i would like

with my current setup the rear flexes shit loads more than standard but the front end is equal to standard or a little better.

when i get blistiens in the front and get it sorted hopefully i can get the font on par with the rear.

still flexes well for standard sierra suspention :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

the rear on mine flexs a little more than the front...the front does flex heaps more but as said above i had to limit it due to the steering link..

have not tried it out very much yet but from what ive done its very balanced......even on side slopes..but i think it has alot to do with the heavier diffs... :D
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Bitsamissin wrote:Gary, you keep mentioning those figures but looking at the pics of your truck I just can't see how you would have the room (in up travel) especially at the rear and even the front with those tyres.
How are you measuring those figures ??
They would be extremely long rear shocks to get that sort of travel ??
I just can't see it to be honest........................ :?


Measured bottom rim-top of wheel arch..

Rear has a lot of droop, shocks are bias mounted to upper chassis rail height. Lower shock mount 7" lower than axle centerline. Resting shock length 22". In conjunction with 3.5" extra track (from +45mm offset 15x6 to +7mm 15x7) it all somehow works out to 20" travel (16" stock)...

Front stock is 10.5", mine has slightly less due to an extra coil and heavier wire to give the lift.

If you are in Melbourne, I will happily come around and you can measure it yourself.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests