Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help, oil leak from engine (1.6L)

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

help, oil leak from engine (1.6L)

Post by SiKiD_01 »

hi all,

just these past couple of days, my vitara has developed an oil leak.

all i can see, is that it is from the rear end of the engine block (sump seal?) and where the engine and bellhousing? are?

i'm assuming there shouldn't be any oil in the bellhousing, (where clutch is) and if there is, i'm in trouble. haven't had much time to have a good look and clean it up.

is this common? what could it be? maybe a seal of some sort, and hopfully not anything major. i'm trying to fing out what it is first, before i start taking it apart, it is my DD.

thanks for any help.
steve
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

It's not coming from the disributor? They have a o-ring that is prone to leaking and running down the back of the engine.
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

leak #2

Post by SiKiD_01 »

yeah, cj, i had that a couple of months ago, and i got that all sorted.

what else could it be?
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
KAC
Posts: 26
Joined: Sat Sep 18, 2004 11:09 am
Location: Amherst NovaScotia Canada

Post by KAC »

Rear crank shaft seal maybe leaking
1985 Samurai VW 1.6 Intercooled And Tuned Turbo Diesel 4.16 T-caseToyota diff's with 4.11's locked rear Toy power steeringAntique Warn winch & 33 Super Swampers ZOOKPOWER.CA
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

rocker cover?
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

if its not the dist seal it will be the rear main seal....
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

seal

Post by SiKiD_01 »

assuming it is the rear crankshaft seal, how hard is it to change?

can i do it myself, or do i need to get a mech to do it?

i figure i need to drop the gear box out, and also take the clutch off. this means if i do it myself, i need to have all the torque settings to put it all back together, that means i have to get a torque wrench as well....

if i have to take the clutch out, i might as well replace it? what do you all think? if i do replace the clutch, what should i get?

thanks
steve
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

Post by 85zook »

centreforce dual friction twin plate.
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Before you pull the engine or gearbox to replace a crank seal I would try the easy stuff, like the rocker cover gasket, I have replaced 1 on both of my 1.6's.
Run your finger along the top of the block just under the rocker cover at the rear of the engine 2 days after giving it a good clean.
Peter.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 62 guests