Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series diff breathers - 1/4" ID ??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

80 series diff breathers - 1/4" ID ??

Post by slowhilux »

Extending the breathers (g/box & transfer too) on the weekend, at quick glance they look like 1/4" ID hose, am i right??

Phill
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

petty sure mine are all done in 1/4" fuel hose, it's too depressing to go and look though.


TJM sells a diff breather kit that does both axles for around $50 if you want to go that way. I have one of those kits and I was going to flog it but since I'll be needing a new truck soon I think I'll hang on to it...

:x
Free air locker to the first 20 callers!
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

Ok thatnks Brian.

Seing how you wont be needing ur ones on the 80 anymore, can i come and pilfer them?? :D :finger: :finger:
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

1/8" bspt threads
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

1MadEngineer wrote:1/8" bspt threads


The thread pitch on the diff fittings?
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Re: 80 series diff breathers - 1/4" ID ??

Post by dow50r »

slowhilux wrote:Extending the breathers (g/box & transfer too) on the weekend, at quick glance they look like 1/4" ID hose, am i right??

Phill

Yep 1/4, whilst doing the rear, tee into the gearbox hose somewhere nice and handy to get to, and leave the top bit dangling.
Andrew
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests