Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Main on a 22r

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Rear Main on a 22r

Post by pongo »

How bad of a job is it to replace.I just put in a new motor and it appears to be leaking in the one place i forgot about.Does the motor and box have to come out again :roll: . What a pita that was.I dont think i can split the box offf the mote whilst in the car. Its a 90 runner. Help me As im scared.
Top
Posts: 100
Joined: Sun Nov 10, 2002 7:04 pm
Location: The Hills

Post by zerosin »

yeh they is a pain but you can if u have to just drop the box and do it all from underneath, but its usually best to pull the motor as when the seals go they tend to score the crank and it needs to be sleeved so it doesnt chew out the new seal....sorry for the doom and gloom but this is why i hate my 22r....stopgap is run 60 grade oil and change every 5000 so it doesnt get too thin
Top
Posts: 702
Joined: Mon Mar 10, 2003 4:51 pm
Location: Newman WA

Post by bundyboy »

i have done the job without pulling out the motor in a bundera...

i dont see why the runner should be any different...

hope for your sake it can be done. ;)
BABY red (GU ute)
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

easy

Post by ratboy »

easy take gear bag out it comes out leve motor in remove fly wheel fit new seal put gears back in drive away no leaks easy do it all in a day
dont forget mate to help u as lifting gear on your owen herts have fun :D :finger: :) :rofl: :? :cool: :lol: :P :cry: ;) :twisted:
Top
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Post by diesel028 »

Im not too sure if a 3L rear main is similar to ur 22r, but I have been quoted $360 for the same job

$10 seal
$350 labour.......5 hours x $70

He only said hed need to pull the box out.
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

thanx guys :D .Seems to the opinion of box can seperate from the engine. At first galnce it seems near impossible to get to all the bell housing bolts. I will just have to find the way that works.No real drama except I JUST PUT THE NEW BLOODY MOTOR BACK IN(left box attached)!!! :bad-words: . Oh well life is fun isn't it
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 2 guests