Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Home made swaybar disconect

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Home made swaybar disconect

Post by KIWI »

Found this interesting front swaybar disconect.
[url]offroad.com/toyota/cheaptricks/swaybar2[/url]
Hope this works. :?

Dave
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Looks pretty simple. I'm still going with the Articulator though...
:twisted:

Noel
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

heres another one, not so "homemade" though.
http://www.rockstomper.com/catalog/suspen/discon

Dave
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

So which type is your front swaybar disconnect Dave? Is it like the ones above or like the Articulator?

Noel
Top
Posts: 232
Joined: Mon Nov 04, 2002 12:12 am
Location: perth western australia

Contact:
Contact dinos4x4

articulator

Post by dinos4x4 »

hello noel
just remember when you get a articualor as soon as you a ready to go offroad take the pin out because i have snapped 2 pins from forgetting to take the pin out then going over rough terain.
Top
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

Same as ones above, still not on vehicle yet.
Seemed to be the easiest to install and use, interested to hear what your thoughts on articulator are.
Mine cost $45, which seemed good for the improvement it is supposed to make.
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Re: articulator

Post by Westoztroopa »

djspajero wrote:hello noel
just remember when you get a articualor as soon as you a ready to go offroad take the pin out because i have snapped 2 pins from forgetting to take the pin out then going over rough terain.


Thanks for the advice Dino. Will be a while before I actually get it and install it but will keep that in mind.


Articulator is a fair bit more than that Dave, but looks well made and should last a while (apart from the pin that is :wink: ).

Noel
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

So what is an Articulator?
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

The Articulator is a quick release swaybar disconnect made by Bitsamissin (Frank) and his mate... It was originally designed for the Pajero, but should be fairly easily adaptable to other IFS designs. I have ordered one but it wont be ready for a while and I wont have time to put it in for a while anyway...
Here's the site http://www.peppernet.org/articulator/

See also original thread in GMH/Isuzu main menu.

Cheers,

Noel
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 0 guests