Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

High Beam Problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 668
Joined: Mon May 19, 2003 4:49 pm
Location: Gold Coast

High Beam Problem

Post by Pesky Pete »

Havent had the time to have a comprehensive look yet but I have a problem with the High Beam on my 80 Series. When I flick the colum switch forward all lights go out. Yet if I pull it back to flash headlights, they work. Low beam is working normally, but the highbeam thing has me a little puzzled. All the fuses etc seem to be okay. I was thinking maybe a relay or something, but because it works when the lever is pulled back I am a bit lost. maybe it is the switch in the column that is at fault.
Last edited by Pesky Pete on Tue Sep 28, 2004 9:30 am, edited 1 time in total.
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

Had the same problem in a car years ago, turned out to be the little spring mechanism behind the steering wheel, had a litlle ball bearing that made the contact as the light stalk moved and it wan't making a good connection.
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

I have the same exact issue with the lux.

Quick fix is to spray some contact cleaner into the area.

Otherwise pull it appart, the connections become pitted due to the current and the little ball thing doesnt make clean contact.
Top
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

Post by rock hopper »

i had the same problem with my hj60 .
remove the plastic pannels from around the switch.
i sprayed mine with crc ....
it works fine now ......
if u have problem while doing this ... give me an e-mail or pm .
and i will do my best to help u .....
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

Have u still got the standard size globes in it....

My mate put bigger ones in his 80 and it burnt out the highbeam in the dipper switch..

It would still work when u pulled it back as u say..
Top
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

Pete, I have found that by rubbing ICE cubes on my Nipples usually gets my high beam working!
HOOLAY Wish i could buy boggers for my DH bike
Top
Posts: 668
Joined: Mon May 19, 2003 4:49 pm
Location: Gold Coast

Post by Pesky Pete »

83 lux wrote:Pete, I have found that by rubbing ICE cubes on my Nipples usually gets my high beam working!


Thats very scary dude. If it was your RED topped Check, well thats different
Top
Posts: 668
Joined: Mon May 19, 2003 4:49 pm
Location: Gold Coast

Post by Pesky Pete »

Thanks Guys I will give it a try tomorrow. 80 series candles are enough of a joke, but no high beam is crazy
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest