Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front Driveshaft help

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1
Joined: Sun Oct 03, 2004 7:21 am

Front Driveshaft help

Post by LoggingBeast »

I have an 82 yota with 3inches of spring and 2 inches of shackle lift. I need to ghet a front driveshaft. I assume I need an extended one. How can I semi-cheeply go about getting one made or swapping one over from somewhere else. any information would be good.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

does the front get much flex ?? if so u will find the slip joint 2 short therefore the only way 2 fix it is get a longer shaft with a longer slip joint in it..
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

hye loggining beast... i had the same problem...but like hypo said do u get much flex??? if u do like i do i picked my self up a custom front shaft from the wreckers for 125 bucks...just lucky there was a reckon luxie that just cam iin so try that or go custom
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest