Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

where to find camber bolts?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

where to find camber bolts?

Post by SiKiD_01 »

does anyone know where i can get camber bolts for my vitara front struts?

i know there sus specialists like pedders, but its too expensive. i don't believe they should be that much.

thanks for any help.
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 444
Joined: Sat Jan 11, 2003 7:29 pm
Location: SOR Perth

Post by roadrunner »

Bloke who put in my camber bolts ( pedders ) said it was possible to modify the holes in the strut that the original bolts go through to allow you to get some adjustment...................

but I don't know effective this would be.
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Why do you want bolts when you're apparently 100% dodgy ;) just get your drill and open the holes up a little to give you some adjustment....can't get any cheaper than that :)
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

How do these actually work?
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

They are a cam bolt. Gives a couple of degrees adjustment either way.
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

:?: got a pic etc?
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

http://www.spcperformance.com/PerfPartSect/PerfPart_EZCam.html I put them on mine with the OME suspension and 20mm coil spacers and it allowed my camber to be within factory spec.
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

Post by SiKiD_01 »

ha ha ha.....

i just spent my life savings to get 31"s on my vitara, now for the tyres to wear out before i get my money's worth, just isn't practical at all through a tight a$$ budget, well actually, no budget!

i heard elongating the holes isn't good, as the bolt(s) move when you go off roading. probably ok on road, unless you hit a gutter.

and its never accurate either, but what do i care right? just have a look at my B/L! :?

oh well, see how it goes. thanks again.
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests