just got the 4runner back on the road with IFS rears and 200mm shackles.
was thinking about moving the front hangers in the rear forward to get a slightly better shackle angle cos they are sitting pretty flat at the moment. with IFS springs the locating pin is 1" further back than the standard set-up so they are more likely to scrub on the rear of the guards. also, it sits sightly lower in the arse then the front and by moving the hanger forward it would stand the shackle slightly more vertical, thus leveling the car. what are your thoughts and is it commonly done. was thinking it would need to come forward about 1.5" or so.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear spring hangers
Moderators: toaddog, Elmo, DUDELUX
rear spring hangers
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
www.jaybeecanvas.com
Who is online
Users browsing this forum: No registered users and 1 guest