Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42 Rear Main Oil Leak

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

TD42 Rear Main Oil Leak

Post by Chookman »

Have a rear main oil leak. Is only small leak but annoying all the same.
How common is the leak??
How much roughly is the repair bill??
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

check the rear of the rocker cover gasket, that is what my rear main oil leak is, i bet.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Post by Chookman »

CRUSHU wrote:check the rear of the rocker cover gasket, that is what my rear main oil leak is, i bet.


Went out and checked it and its bone dry.
Would have been easy fix. Thanks all the same.
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

bugger...... im still hoping that it is what is wrong with mine......fingers crossed!!!
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Rear main seal oil leaks are pretty rare with the TD 42. The seal itself is easy to replace, but engine or gearbox needs to be removed :cry: Once the flywheel and back plate are removed, the seal housing can be removed and the seal driven out. If high km's on engine, reposition seal in a slightly different position if seal surface on crank is scored badly. If doing it yourself, make sure you get the gasket that seals the oil seal housing to the block. Make sure PCV valve is not blocked.

Nick
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests