G'Day, evryone, just wondering what is entailed in doing a 2" body lift on my 4 door auto Range Rover, im in the process of doing a 2" spring lift, but was wondering how difficult ect or things to look out for when doing a body lift if it is possible. And if so, what material should be used in doing the lift, or is it better to get an off the shelf kit or something.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Body Lift on an Auto Range Rover
Moderator: Micka
Body Lift on an Auto Range Rover
Go it or blow it
You will require:
1: 10 spacers 50mm diamx50mm long steel with 11mm hole drilled through.
2: 10 bolts M10 130mm grade 8.8.
3: 50mm extentsions for the seat belt mounts 4 off.
4: 4 brackets at rear wheel will require extending 50mm these bolt onto chassy.
5: 2 spacers to go between chassy and body under driver seat bolt in.
6: bracket to lift rear brake tee or longer hose.
7: relocate front brake line bracket 50m lower pipe can be worked carefully to gain 50mm, or fit longer hoses.
8: may require extension to low range lever (personel choice)
9: relocate radiator down 50mm requires lowering bracket on front panel.
10: engineers cert.
regards
Michael.
1: 10 spacers 50mm diamx50mm long steel with 11mm hole drilled through.
2: 10 bolts M10 130mm grade 8.8.
3: 50mm extentsions for the seat belt mounts 4 off.
4: 4 brackets at rear wheel will require extending 50mm these bolt onto chassy.
5: 2 spacers to go between chassy and body under driver seat bolt in.
6: bracket to lift rear brake tee or longer hose.
7: relocate front brake line bracket 50m lower pipe can be worked carefully to gain 50mm, or fit longer hoses.
8: may require extension to low range lever (personel choice)
9: relocate radiator down 50mm requires lowering bracket on front panel.
10: engineers cert.
regards
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Who is online
Users browsing this forum: No registered users and 34 guests