Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Was fillin up radiator after a rebuild of my TD42 and noticed water was pouring out of my water pump breather - does that mean its f**ked??
Went to wreckers and got another one ready to install, but thought i'd ask everyone in here what they know and think? as its raining and i cbf doin a water pump swapover in the wet...
sounds stuffed to me. new pump price from repco @$105, nissan @$135 and bursons@$150. personally i wouldn't use a secondhand water pump on a rebuilt motor as it'll probably just shet itself as well, and for the price of a new one it's a lot cheaper than rebuilding your motor again. plus you get a warranty on it. your call.
I brought a genuine one and it came with a gasket and doesent leak. I paid about $130 from memory and it came with a 1yr warranty. The first one lasted 13yrs, the 2nd hand one I brought lasted 6mths. So I expect this one to last another 10+ years.
I think repco did one with a 2yr warranty for $150 and they also had one for $115 with a 1yr.
I had the same problem after my re-build. It seems to happen on pumps that have been sitting around for a while. You cant re-build/replace the seal. As Turps said, its best to go to the Ni$$an dealer and get another one. Yes i know, its a pain in the bum after shelling out all this $$$ for the re-build only to have this happen. The price that Turps gave is the right price and does incluce a gasket It might be a tin gasket, rather than the paper type which comes in the gasket kit..
yeah, pump is stuffed, and id have brought a new pump, id almost put money on the fact that you second hand one is probably stuffed or close to it.
if you've done the rebuild why cut corners on a water pump? its an extra $150 odd, especialy when a doggy pump could cook you motor and then you have wasted all that money on the rebuild!