I was wondering if anyone has pics of how thier 1 pce tailgate was made and how it looks. Just welding them down the centre is a bit too rough for what I want, I am going a long way with my rebuild and I dont want a tailgate that looks rough.
And what type of hinges and catch setup do you use with the single gate?
Any help with this would be greatly appreciated
Thanks
Raymond
my email for any pics is: raymond.spackman@bigpond.com
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Making a 1 Pce tailgate for FJ40
Moderators: toaddog, Elmo, DUDELUX
Im here for the sausage!
t
wondering where i have a pic....
mine is a swing out one.
fibreglass.
the hinges are the original ones, they are on the passenger side.
the latch system though is a bit ordinary. its got a gate style latch, that i have temporarily(6months ago) replaced with a bolt and nut system as i rarely open it up.
mine is a swing out one.
fibreglass.
the hinges are the original ones, they are on the passenger side.
the latch system though is a bit ordinary. its got a gate style latch, that i have temporarily(6months ago) replaced with a bolt and nut system as i rarely open it up.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
im sure mine has the side hinges just moved from the side to the bottom
just have to redrill the holes in the bottom & fill the side holes
better ton the bottom because you can open the tailgate down & yous like a bench
tailgate is just a metal from eith tin on outside & mdf on inside looks fine
& does the job
just have to redrill the holes in the bottom & fill the side holes
better ton the bottom because you can open the tailgate down & yous like a bench
tailgate is just a metal from eith tin on outside & mdf on inside looks fine
& does the job
no more forty now have a 80
How about grabbing hinges and the Wire stop off a commodore or whatever ute...
Then you will have the wire rope there to stop at whatever height you want.
Then you will have the wire rope there to stop at whatever height you want.
Meldge...
86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...
[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...
[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Im here for the sausage!
Mine has a drop down tailgate which is good to use as a bench/seat, but it's also a pain when your loading/gettin stuff out of the back, as it's a long stretch. When I rebuild mine it's gettin a swing out...for sure...but you can use chain as a stopper, with plastic tube over it to stop rattles...cheap at bunnings!!
Okay, mine is a soft top, so I just did a checker plate one piece unit. It has the original BJ40 hinges on the bottom and a catch system off a Holden Ute. So, it had a lever on the outside and the locking system on the inside. Crank the lever and it pulls the pins out of the Holden catches, which are mounted on the sides. I will try to get the camera off the old man tonight to take a few pics. This system works really well, but it was a bit of messing around to get it in and working right.
Nice gq swb ute chop with a huffer for the good times
Who is online
Users browsing this forum: No registered users and 140 guests