Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tightening a LSD
tightening a LSD
does anyone have any tricks to tightening a GQ rear lsd diff as mine is not as good as it once was, ie spring spacers, extra clutch discs, heavy springs. has anyone done this , how did it go and where did you source parts. thanks in advance.
Living the dream on the hill that floods
i had a go at tightening a LSD with modiate suscess i could not see any way of tighting it with out been dodgy cos it was for a dayly driver. but where are two thickness clutch plates. so u can fill the LSD with the thicker plates but the are not cheep (about $110 per plate).
what i ended up doing is sand blust the plates to remove the glazing it has helped but i don't know how long it will last
what i ended up doing is sand blust the plates to remove the glazing it has helped but i don't know how long it will last
Who is online
Users browsing this forum: No registered users and 1 guest