Im going to put a set of 29" or 235/75/15 coopers on my gfs vitara but i need to know what has to be done so it wont rub?? Will it need a 2" lift ??
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what do i need
235/75 is gonna run 33mm closer to your guards than your 205/75 so you need to lift it about that much. more would be good, but not completely necessary.
Easiset solution is basically any off the shelf 2" suspension.
Cheapest is probably 8 alloy or HDPE blocks about 30mm high.... (you can lose 3mm I think with no problem)
Easiset solution is basically any off the shelf 2" suspension.
Cheapest is probably 8 alloy or HDPE blocks about 30mm high.... (you can lose 3mm I think with no problem)
Pic's worth a 1000 words so here ya go.....
standard rims, no spring lift, no body lift and no rubbing
although this is on my missus zook and it see's no off roading (yet
) I ran mine with no lift and 30x9.5x15 Bridgestone M/Ts with only minimal rubbing on the chassis on full lock before going to the 3" bodylift.
standard rims, no spring lift, no body lift and no rubbing
although this is on my missus zook and it see's no off roading (yet
) I ran mine with no lift and 30x9.5x15 Bridgestone M/Ts with only minimal rubbing on the chassis on full lock before going to the 3" bodylift.'93 Escudo.16v K&N, Chase Header, Calmini 3" suspension, 3" custom alloy bodylift, Centerforce dualfriction clutch, Calmini 4:24.1,Calmini 5:83 R&Ps + Anvil, ARB Front+Rear, Custom front bumper with Warn 6000, Safari snorkel, 32x10.5 Mongrels.
Who is online
Users browsing this forum: No registered users and 0 guests