Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how much for body lift?
Moderator: Micka
how much for body lift?
is $1100 fitted a rip off?
its about the going price to lift everything up with it - bullbars, rear bar, sliders if attached to chassis and the cost of fitting and removing everything.
FYI....
blocks... 100 bux(piece of steel cut into lengths and drilled)
bolts ... 50 bux
carton of piss - 30 bux
another carton of piss/bottle of spirits for mate to do front and rear bar cut and weld to suit - 50 bux
all up works out to be 230... i'd budget 250 for something like this and i reckon you'd have a bit of change.
1100 is steep, but you get what you pay for... does that include engineering??
TOM
FYI....
blocks... 100 bux(piece of steel cut into lengths and drilled)
bolts ... 50 bux
carton of piss - 30 bux
another carton of piss/bottle of spirits for mate to do front and rear bar cut and weld to suit - 50 bux
all up works out to be 230... i'd budget 250 for something like this and i reckon you'd have a bit of change.
1100 is steep, but you get what you pay for... does that include engineering??
TOM
Ritter's quoted me about the same, $1000 approx.
The Rangie Spares kit is $500, and then all it takes is your time!
But you do need to weld for that kit, and your front/rear bars, sliders will still need modifying.
If you really don't want to do anything, then $1000 to cover everything isn't too bad a quote.
The Rangie Spares kit is $500, and then all it takes is your time!
But you do need to weld for that kit, and your front/rear bars, sliders will still need modifying.
If you really don't want to do anything, then $1000 to cover everything isn't too bad a quote.
The last time I checked Graeme Cooper automotive had a 2 inch lift for around the $230 mark, including bolts and new rubber mounts. You still need to make up the rear seatbelt mounts and so forth.
I would say with that kit about $300 total after you get the bits. Some welding required as all have mentioned here.
Regards,
Trav
I would say with that kit about $300 total after you get the bits. Some welding required as all have mentioned here.
Regards,
Trav
Land Rover- The Collingwood of 4WD's!!!!
Re: how much for body lift?
muppet_man67 wrote:is $1100 fitted a rip off?
try rangieautomotive
9739 6989
there body lifts are quite cheap and they do a lot more extra like welding in blocks on parts of the chassis but i know they are under $800
but call to check speak with adrain.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
No welding and kit inc aluminium blocks, bolts (hex head), nyloks, retainers (seat belt brackets) and load carrier blocks will cost you for up to 2" - $350, or up to 3" - $400 changeover on retainers.
Chassis extension block (60mm) for front bar is $150 and are weld on, but will fit most standard rangie bars. Dont need to buy new body mounts just swap the top rubber to the bottom, unless they are too worn.
I am currently out of stock but will have more in around the end of month at the latest.
Cheers
Ben
Chassis extension block (60mm) for front bar is $150 and are weld on, but will fit most standard rangie bars. Dont need to buy new body mounts just swap the top rubber to the bottom, unless they are too worn.
I am currently out of stock but will have more in around the end of month at the latest.
Cheers
Ben
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
No welding and kit inc aluminium blocks, bolts (hex head), nyloks, retainers (seat belt brackets) and load carrier blocks will cost you for up to 2" - $350, or up to 3" - $400 changeover on retainers.
That's a good kit, and a good deal!
Rangie Spares kit has all that, but you have to weld on the load carrier blocks to the chassis rails, as well as the radiator spacers, but for $500.
I'd be choosing this kit if i had do it again.
i may be wrong for other states but welding anything onto the chasis is illegal in NSW got pinged for it about 5 years back on my suzk
Opps... too late!
BASSYK wrote:i just got a 2" lift and fiberglass flares flares fitted for $1200 at hardcore 4x4 in mitcham Ph 9872 3133
Did that include the flares and lift kit, or just the fitting?
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Seems pretty good, guess it is a bit cheaper for a two door. Still, you got it all fitted for ~$400 bucks 
Assuming that it was the RS kit and flares?
Luke
Assuming that it was the RS kit and flares?
Luke
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Who is online
Users browsing this forum: No registered users and 0 guests