Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cutting hilux disc brake backing shields Q?

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Cutting hilux disc brake backing shields Q?

Post by ausyota »

Im in the process of shaving bracing etc on my hilux front diff and was thinking of hacking off the disc brake backing plates to stop mud and sh!t getting jammed in there.
What I want to know is the callipers have a short steel brake line going up to a bracket that is attached to the backing plate. What is the go with that?
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

You could make a bracket off the caliper mount bolts to hold the brake line in place.
Where the f#@k did that come from
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

just get the flexy lines made so that it can screw straight into the caliper this is wot i did wif the GQ axles under mine...
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 2 guests