Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Porting and Polishing

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Porting and Polishing

Post by nicbeer »

Since the heads gone on the zook thinking of getting this done.

Anyone done it and what gains did it yield.

Also anyone else post up any mods that can be done to the sierra heads once there off.

I believe 1.6 exhaust valves fit in but what does this do for the head.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

http://www.suzisport.au.com have swirl polished stainless 0.5 mm oversize valves

280 or so but :?
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

bump

someone must know.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

I'm pulling mine off (hopefully) to give it a bit of work soon, I'll keep you posted on whatever I find or end up doing.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

nicbeer wrote:bump

someone must know.

cheers


They imporve response in the motor especially noticable in low RPM, the smaller inlet keeps air speed quite high making for better atomisation of the air fuel mixture, so you get a good burn (There for good power) and the larger exhaust valve (if you have a better breating exhaust ) allows for better scavanging of the exhaust gasses from the combustion chamber..
This means that there is more room for air/fuel instead of burned gas's so you get a bit more bang per cycle.

This is most effective if there is a proper valve job and the area above the valve is properly blended allowing good flow..
While your at it, they can do some cool stuff with cams as well to allow a bit better mid range and top end without sacrificing bottom end torque.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

i got a price sum time ago to port and polish and flow the head for max power for around the $400 mark so dont expect to get out of it cheaply.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Whered ya get the quote from bazooked.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

high flow induction, dont no if they r still around.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests