Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

who in syd does vit lifts?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

who in syd does vit lifts?

Post by SiKiD_01 »

ok, i know some one who has a vitara, and wants to lift it. they are in the sydney area.

the want to get about 3" lift from sus.

so who deals with this in syd? any shops? any one to contact?

thanks
steve
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 95
Joined: Thu Feb 26, 2004 8:25 pm
Location: Napier, New Zealand

Contact:
Contact mudfkr

Post by mudfkr »

Steve,

How is he going to get a 3" lift, 2" OME with spring spacers as well ??

The only 3" kit that I'm aware of for the Vitara is the Calmini one and in which case he'd be better off ordering it direct from the US and saving a few $$.

I just ordered mine last week from them (had to wait for them to get it back in stock :roll: ) and with the currant exchange rates it was less than OME would have cost me over here.

OME = $1650 nz
Calmini $1517.60 nz - to my door (+ import duty and GST)

Shane
'93 Escudo.16v K&N, Chase Header, Calmini 3" suspension, 3" custom alloy bodylift, Centerforce dualfriction clutch, Calmini 4:24.1,Calmini 5:83 R&Ps + Anvil, ARB Front+Rear, Custom front bumper with Warn 6000, Safari snorkel, 32x10.5 Mongrels.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Re: who in syd does vit lifts?

Post by redzook »

SiKiD_01 wrote:ok, i know some one who has a vitara, and wants to lift it. they are in the sydney area.

the want to get about 3" lift from sus.

so who deals with this in syd? any shops? any one to contact?

thanks
steve


try Overkill Engineering
94766137
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

Post by SiKiD_01 »

thanks for the info.

i think she might get a 2" suspension, and maybe a 2" body lift done, seems to be the simplest, rather than going for the calmini 3".

not sure what brands yet, but still looking.

thanks again.
steve
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Re: who in syd does vit lifts?

Post by Gonzo »

SiKiD_01 wrote:so who deals with this in syd? any shops? any one to contact?


I do, and i work for beer :armsup:
Top
Posts: 129
Joined: Sun Sep 28, 2003 8:07 pm
Location: Rockhampton QLD Australia

Post by Dick »

You could make your own up using custom coils from "Allsprings" down there... They know Zooks.. Whack some longer shocks in and you are away! I got 3" lift in the front and nearly 4" in the rear...
05 Patrol GU ST Ute
3" lift, 3" exhaust, custom Garrett BB Turbo and top mount.. and electric mirrors !
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Re: who in syd does vit lifts?

Post by stumped »

Gonzo wrote:
SiKiD_01 wrote:so who deals with this in syd? any shops? any one to contact?


I do, and i work for beer :armsup:


yeah, but we've seen your vit :D
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

And what's wrong with his vit? Just cos he did the drunken angle grinder work?
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

i'm just jealous cos i'm only running 31s :lol:
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

fasdf

Post by SiKiD_01 »

HEY! whats wrong with 31"s?
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Re: fasdf

Post by Gonzo »

SiKiD_01 wrote:HEY! whats wrong with 31"s?


they're 2 inches too small :P
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

fdsfasdfga

Post by SiKiD_01 »

Gonzo:

http://www.alcoholics-anonymous.org/


:roll:
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 122
Joined: Thu Jun 03, 2004 7:53 pm
Location: Canberra

Post by RIKSTR »

Kaos can hook you up with a 3" Calmini kit, it is about the only way to do it right, and with the 3" body you can fit 32" easy
V6 GV , Body Lift , Calmini , 255/70 BF MTR
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

RIKSTR wrote:Kaos can hook you up with a 3" Calmini kit, it is about the only way to do it right, and with the 3" body you can fit 32" easy


3 inch lift + 3 inch cut = 32's

:cool:
Gone drag racing......
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

uphiir wrote:
RIKSTR wrote:Kaos can hook you up with a 3" Calmini kit, it is about the only way to do it right, and with the 3" body you can fit 32" easy


3 inch lift + 3 inch cut = 32's

:cool:


3 inch suspension + 1 inch body + fucked if i know how much i cut off = 33's
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Gonzo, will you be at Nissan Trials. I wanna check out your Zuk...
Gone drag racing......
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

uphiir wrote:Gonzo, will you be at Nissan Trials. I wanna check out your Zuk...


i think i may be going there just to watch, but i have doubt it.

will be doing a day trip somewhere (lithgow maybe) on sat

failing that just come over to nth syd and have a poke...
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests