Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Once and for all

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Once and for all

Post by -Mick- »

What is the track width of a narrow track sierra :?:

What is the track width of a wide track sierra :?:

:? :lol: Mick
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Just goes to show post count doesn't represtent knowledge!


Search newbie :finger:


http://www.off-road.com/suzuki/techinfo.htm

You will find it under the year spec's. I didn't check myself though
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

DeWsE wrote:Just goes to show post count doesn't represtent knowledge!


Search newbie :finger:


http://www.off-road.com/suzuki/techinfo.htm

You will find it under the year spec's. I didn't check myself though


Yo pad whore do check it for yourself it says wide and narrow tracks are the same :x :finger: :lol:

That's why I got the sh!ts and posted this :roll:

I searched here too but couldn't find a definitive answer :roll:
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

to clarify it says tread of narrow and track width wide are the same but still doesn't answer the question :?
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

"Well i'm glad we sorted that out then".................tip toe quitely out of the room.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

DeWsE wrote:"Well i'm glad we sorted that out then".................tip toe quitely out of the room.


:lol:
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: Once and for all

Post by bigsteve »

-Mick- wrote:What is the track width of a narrow track sierra :?:

What is the track width of a wide track sierra :?:

:? :lol: Mick


Aren't you part way through the conversion??

Need to borrow a tape measure :finger: ;)
yeshemesh
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Re: Once and for all

Post by -Mick- »

bigsteve wrote:
-Mick- wrote:What is the track width of a narrow track sierra :?:

What is the track width of a wide track sierra :?:

:? :lol: Mick


Aren't you part way through the conversion??

Need to borrow a tape measure :finger: ;)


Yeah but the wt diffs are at Damo's place so it'll have to be a loooong one :oops: :lol:

I wanted wms-wms measurements for each to see how much wider it'll be cause I just fitted these Grimace calmini flares I got off some old pos :finger:

and they give me HEAPS to fill, like my track will go another 5 inches per side :cool: I'm also getting my current rims cut and rewelded for more offset so trying to figure out how much I should go :)

Now stop whoring in my thread and only post if you know the answer :finger: :D No soup for you :lol:
Top
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

i'll run a tape over mine tomorrow. i've got a NT and a WT set of diffs sitting next to each other so that it will be an easy job
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Barathrum wrote:i'll run a tape over mine tomorrow. i've got a NT and a WT set of diffs sitting next to each other so that it will be an easy job


Thanks dude :D
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: Once and for all

Post by bigsteve »

-Mick- wrote:
bigsteve wrote:
-Mick- wrote:What is the track width of a narrow track sierra :?:

What is the track width of a wide track sierra :?:

:? :lol: Mick


Aren't you part way through the conversion??

Need to borrow a tape measure :finger: ;)


Yeah but the wt diffs are at Damo's place so it'll have to be a loooong one :oops: :lol:

I wanted wms-wms measurements for each to see how much wider it'll be cause I just fitted these Grimace calmini flares I got off some old pos :finger:

and they give me HEAPS to fill, like my track will go another 5 inches per side :cool: I'm also getting my current rims cut and rewelded for more offset so trying to figure out how much I should go :)

Now stop whoring in my thread and only post if you know the answer :finger: :D No soup for you :lol:


Well with WT's and those flares and 15x7's with 2.5 inches of back spacing my 10.5 inch wide tyres were just at the edge of the flare.
yeshemesh
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

cool thanks bigsteve :cool:
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

-Mick- wrote:cool thanks bigsteve :cool:


See.......................... who needs measurements ;)
yeshemesh
Top
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

NT
Front 49 WMS
Rear 49 WMS

WT
Front 52 WMS
Rear 52 WMS

measurements might be a little out but not much. there only so much one person can do with a tape
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Barathrum wrote:NT
Front 49 WMS
Rear 49 WMS

WT
Front 52 WMS
Rear 52 WMS

measurements might be a little out but not much. there only so much one person can do with a tape


Champ :D
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

might be worth putting into the general tech sticky ;)
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Re: Once and for all

Post by Damo »

-Mick- wrote:
bigsteve wrote:
-Mick- wrote:What is the track width of a narrow track sierra :?:

What is the track width of a wide track sierra :?:

:? :lol: Mick


Aren't you part way through the conversion??

Need to borrow a tape measure :finger: ;)


Yeah but the wt diffs are at Damo's place so it'll have to be a loooong one :oops: :lol:

I wanted wms-wms measurements for each to see how much wider it'll be cause I just fitted these Grimace calmini flares I got off some old pos :finger:

and they give me HEAPS to fill, like my track will go another 5 inches per side :cool: I'm also getting my current rims cut and rewelded for more offset so trying to figure out how much I should go :)

Now stop whoring in my thread and only post if you know the answer :finger: :D No soup for you :lol:


Just coz your junk is in my garage dont mean I am measuring stuff for you :finger:
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Didn't ask you too not sure I'd be real confident in the result :finger: :lol:
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

-Mick- wrote:Didn't ask you too not sure I'd be real confident in the result :finger: :lol:


Now that you mention it I'm not confident those diffs are still there ;) :finger:
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Damo wrote:
-Mick- wrote:Didn't ask you too not sure I'd be real confident in the result :finger: :lol:


Now that you mention it I'm not confident those diffs are still there ;) :finger:


:rofl: nice
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests