Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU Diff on an MK

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1
Joined: Wed Nov 03, 2004 2:55 pm

GU Diff on an MK

Post by BGBug »

Does anyone know if the the front and rear axles of an MK can be replaced by thos from a GU?
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

anythings posssible. grind the mounts off the gu and setup for leaf or weld mounts and spring perches on the chassis and setup for coils. drive shaft mods will be needed. steering attention will be needed. unless you are handy it will be cheaper to buy a gq and just swap the front diff.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

Post by r0ck_m0nkey »

Not to mention an MK has the rear diff offset, and a GU has the rear diff in the centre.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

just run the shaft at an angle. the shaft still moves in a similar angle just in a different plane
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Thats been my major worry about running a GQ diff in the rear of mine. So the tail shart running on that angle wont matter. If so it sounds a lot eaiser then cutting and off centering the diff.
Its not cool, unless it's got boost :)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests