Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

surf rear end

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

surf rear end

Post by Hales231271 »

Is the hilux surf chasis the same as the hilux chasis?

Looking at putting a coil rear end in the lux.
Can get a rear chasis cut and diff housing really cheap.
Use the bits off the chasis and mount to the lux.


cheers

Darren
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Not sure but you should be able to make it fit. Got a welder and a grinder? :D
Where the f#@k did that come from
Posts: 901
Joined: Thu Feb 05, 2004 10:15 pm
Location: Pelverata, Taswegia

Post by .::lil-oscar::. »

Check out the surf forum, someone on there should be able to answer your question :)

http://www.toyotasurf.asn.au
** For Future Reference :finger: :armsup:**
[quote="Reddo"]
Pity my mrs is so young, i'd love kids![/quote]
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

different width axles depending what model hilux you have. different handbrake setup. different chassis shape, this will make the truck high. other than that it will be pretty straight forward.


NICK
TECH SCREW GURU
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Post by Hales231271 »

Thanks Guys.

Nick,what hieght increase you think it may be?

Will use my IFS rear housing as I think the axles are only 5mm
difference.

Rear brakes ,I will use my rear disc set up of the lux.
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Will use my IFS rear housing as I think the axles are only 5mm
difference


Abit of extra width in the rear is good for stability ;)
Where the f#@k did that come from
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests