Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rubber 3 degree castor bushes?????

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Rubber 3 degree castor bushes?????

Post by CJ Burns Esq »

Does any one know who supplies the rubber three degree offset bushes in Sydney?
I saw an advert for them recently, but I can't find it.
I am sick of the plastic ones chopping out after 6 monthes.
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Unfortunately I can provide no help but by plastic I assume you mean polyurethane?

I didn't think caster correction bushes were available in rubber, if so I too would be interested in a brand.

:D
KRiS
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

think they were avaliable in rubber either..

Might pay u to get some castor plates.. these r only $170 a set and u wont wear them out..
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

Do they do 3 deg castor plates?
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

castor plates

Post by stormpatrol »

make em yourself its easy 6mm pl cut out the shape work out hole centres drill paint fit 2hrs tops cost not much , play around with a cardboard template first 16mm hls also need longer bolts grade 8 nyloc nuts cheers stormpatrol ps they mostly start at 3 deg castor and up
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

Don't pay $170 for them. I got a set cut at an engineering place at Hemmant in Brisbane for $59.00. Then, the 6 new bolts and nylocks cost me a whole $20 in total.

Cheap and easy. Used 6mm plate.
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Posts: 194
Joined: Sun Apr 13, 2003 4:01 pm
Location: Melbourne

Post by Boopa »

...is it worth doing/buying plates for a 3 or 4 inch lift?

about to do my GQ's susp and would do it once...the right way
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests