Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

31's on a feroza?

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 140
Joined: Sun Nov 07, 2004 10:23 am
Location: Eastside Vic

31's on a feroza?

Post by Goutman »

Just wondering is it possible to fit 31's to a feroza without a spring or body lift, an whether the wheels have to be offset... girlfriends considering buying one an ive gota make it look a little beefy!!!!
Top
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

No.

You'll need a 2 inch spring and 2 inch body lift to clear them at full lock. You might get away with one or the other if it's not gonna get wheeled hard.

Go for 235x75's, they look good on an offset rim and dont screw the gearing too bad, as Ferozas don't have a great reduction.

Where are you and when are you looking to buy? I might know of one for sale in the next few months...
On boooooost!!
Top
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

Post by icebreaker »

I'm looking at going 30x9.5.. And putting in a 2" Suspension lift..

Wanted to go 31's for width, but been told it i'll need more lift also.
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

i used to have 31 on my old feroza and they just rubbed on full lock with full compression and that was with about 2 1/4 lift at the front and about 2 1/2 at the rear. front is easy to lift just remove sway bar and wind up torsion bars. rear has to be reset or replaced. new springs and longer shackles is the best way to go (thats what i rekon others will differ)
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
Posts: 2
Joined: Mon Nov 15, 2004 12:06 am
Location: Cornwall UK

Post by jenny »

I've got 31x 10.5's on my standard Sportrak. They fit fine as long as you take off the mud flaps. Same as 'Built4thrashing' mine rub on full lock and full compresion - nothing to worry about! ;)
Top
Posts: 269
Joined: Tue May 25, 2004 5:37 pm
Location: Adelaide

Contact:
Contact crowey

Post by crowey »

They fit easy with a 2 inch body lift.
Here is a pic with my old 31's... i now have a set of simex centerpedes. They rub a bit on full lock if i have a bit of travel on the front wheels

Image[/img]
[quote="Dangerous Dave"] Toyhatsu, Will you marry me and have my babies?! [/quote]
Top
Posts: 2
Joined: Sat Nov 27, 2004 5:07 am
Location: Brazil

Post by alecoco »

Hi, folks.

My 94 Feroza SX is running on 31 x 10.5s with the stock suspention and body. It rarely rubs a bit on the front wheels, but in general they fit allright.

Cheers, Alexandre Coco
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 1 guest