Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lifting a 60 questions

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Lifting a 60 questions

Post by tomsoffroad »

Hi

Is there any tricks (read cheap) to give an old 60 series Cruiser about 4 inches of lift?
Not to keen on doing a spring over conversion at this stage.
Just wondering if anyone knew of any springs out of other vehicles which fitted.

Cheers Thomas
Where the f#@k did that come from
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

60

Post by humphey »

mate use 75 series springs in the front and some longer hangers . 75's are 2'' longers on the front meserment . the rear are a costom spring [main and wraper ] :)
Top
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

This has been discussed lots of times.

Easiest way is simply 2 inch body lift and 2 inch suspension lift and it will clear 35s easy without much scrubbing at all
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests