Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 Series & 60 Series full floater rear ends

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

40 Series & 60 Series full floater rear ends

Post by Damo »

Hey Toyota dudes :D

Can anyone tell me the WMS measurements of the 40 & 60 FF rears?
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Any1?
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Sorry dude, I just picked up a FF to suit a 40 series, its on my garage floor. I'd be happy to get some measurements as soon as u let me know WTF WMS is. :D
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

RAY185 wrote:Sorry dude, I just picked up a FF to suit a 40 series, its on my garage floor. I'd be happy to get some measurements as soon as u let me know WTF WMS is. :D


WMS = Wheel Mount Surface. Basically it's the distance between the wheel mounting surface on each side.

:D
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Ok, I measured my 40 series FF WMS out to 1430mm. I heard the 60 series is about 3 inches wider but couldnt be sure.

Hope that helps
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests