Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

L28 Needed

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

L28 Needed

Post by stewie81 »

Hi Guys just chasing a Cheap L28 to go into my 81MQ Lwb.. Mine is quiet sad at the moment sounding like a diesel and oil all over side of Block and Blowing shit loads of smoke, And lost 60% of power...


SO I was just wondering if any one has one or knows of one cheap but still running and good ;)

Cheers
Stewie [/b]
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

change your rocker cover gasket (easy) and adjust your valve clearances, your engine will be much happier. also electronic ignition kit or have your points adjusted by someone good

http://www.zcar.com/forums/read.php?f=1&i=402405&t=402402
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

If I remem correctly I think Patroldude has got one he was wanting to get rid of
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

mine was getting sad also, and probably about a month back i looked at the clearances & they were around 2.5mm :shock: were they should be around 0.2mm & 0.3mm, adjusted them, re did timing and carby etc...(although it still needs attention) & it runs allot better, but give this a crack first b4 swapping engines,
adjusting valves your first time should take no more than a half hour. Do it cold the first time if you like to figure out what your doing,replace rocker cover, then take it for a drive & warm it up, then re-remove rocker cover & go over them again to make sure they are right when "hot"
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

Post by stewie81 »

Thanks heaps Mate I will give it a go... I have not actually do it b4 but i am gonna give it a go ;)...

once again Thanks I will let you know how i go ;)

Stewie
Posts: 136
Joined: Wed Mar 03, 2004 2:29 am
Location: Gold Coast

Post by MQPatrol »

if ya luck out and you wanna drive to the coast, i got one that you can have gratis to make some shed space. pm me if your into it.
Posts: 176
Joined: Wed Jun 09, 2004 8:43 pm
Location: South Brisbane

Post by shortgq »

MQ patrol..... if stewie81 doesn't want it. i'll take it off your hands so u can have that extra space......
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

By the way if you can buy one of those 17mm crow foot spanners i highly recommend it
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

Thanks Everyone

Post by stewie81 »

Thanks to all that replied on my post.. Even more thanks to MQpatrol Dude on coast for offer of engine BUT I did actually go the rebuild option for now to get back on road and keep it going Whilst i do other mods to it...

Like 2"body lift and spring lift... Would love SOA but not game enough to Try... Any helpers?
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Re: Thanks Everyone

Post by MereMale »

stewie81 wrote:Like 2"body lift and spring lift... Would love SOA but not game enough to Try... Any helpers?


I was in the same boat, until one came up for sale.
So I'd say the best ppl to ask would be Screwy, Patroldude and poss Kingy or Wendle
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests