Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Light relay ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Light relay ?

Post by Drafty »

I have this relay for my roof lights (4) and would like some help wiring it up, also what kind of wire (amp) should i be using. 2 are Hella 55watt and 2 are Cibie 100watt.


All expenations must be in English. No electrical mumbo jumbo please.
Posts: 208
Joined: Fri Jan 24, 2003 4:00 pm
Location: Newcastle, nsw

Post by zukin »

i think i need one of those babies how much did it set ya back and what sorta power is it???
Ya here for a good time not a long time!
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

it is a 2 in 1 relay with double fuses. l think it cost about $50 but that was a few years ago, had it on my 80 series. with the GU you can pick up a plug in loom kit fot $75 so l never used it. As for power :? both fuses are 30amp, thats all l know. Problem is l dont remember how to wire it up. Dohhh! :oops:
Posts: 208
Joined: Fri Jan 24, 2003 4:00 pm
Location: Newcastle, nsw

Post by zukin »

looks complicated mate just take it to a auto electric save yaself the worries i reakon better to be save then sorry :roll:
Ya here for a good time not a long time!
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Post by killalux »

i would say that 1 terminal would be earth, 1 would be trigger( ie high beam switch), 2 would be battery, and 2 would be to the lights.

thats just my opinion, i have never seen one before so i am mostly just guesing.
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

And thats all there is to it! Thats how mine works.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

I'm sure when i fitted it last time l had one switch to S1 and a second switch to S2. Now l'm more confused then when l began. :?
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

Ask your brother, see if he has an "expenation". :finger:
L = Load i would think.
See you guys at the Paj challenge. How did the new GPS go?
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

S1=Switch(then to earth)
S2=Switch(then to earth)
B=Battery
L1=Load(spotlight)
L2=Load(spotlight)
S=Signal(from highbeam or wherever you want it to be ran with)

This is all from memory as i havent wired one of these up in the last few years.
This is a dual circuit relay designed to run 2 seperate sets of lights. And are quite a good relay.
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Good pickup Juzza missed that one.

GPS worked fine but kept on loosing satelite even with the external antena. Will be running both units this weekend again.

When are you guys getting there?
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Thanks Ruff, a diagram would be helpfull. Your explanation would require 3 switches if i understand correctly. l thought seeing the B is for battery that the S might be an earth or doesnt it require an earth? :?
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Post by killalux »

from what i understand of what ruff said, it is a negative trigger relay.
so S would be conected constantly providing positive current and S1 & S2 provide the earth when switched on which compltes the circuit.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Steve is right it is earth switched as it is a lot safer and efficiant to run a short power cable from the battery to the relay and only run the earth through the firewall to the switches. There is less chance of chaffing where it goes through the firewall and therefore less chance of fire!
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Thanks Ruff will give that a go tomorow, looks right and your drawing is underatandable. 8)
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

done in crayon !!!!!!!!
:finger: :finger:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Post by tritonasuras »

I used one of these years ago to make a heavy duty relay for the headlights in my 4runner. I used 6mm wire through out with 90/130 globes.
Made a big difference over the original small toyota wiring...

Rob
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

Yeah Drafty, we'll be staying in Marysville friday night and heading on to the campground on Saturday morning. See ya at the pub on friday night. :D
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Juzza, where is the Pajero Challenge !!! :?
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

moose wrote:done in crayon !!!!!!!!
:finger: :finger:


Get it right i used CRAYOLA :finger: :finger:
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

RUFF wrote:
moose wrote:done in crayon !!!!!!!!
:finger: :finger:


Get it right i used CRAYOLA :finger: :finger:


did you have your art smock on? :finger:
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Of course i had my bloody art smock on doesnt everybody have their art smock on? :lol: :lol:
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

RUFF wrote:Of course i had my bloody art smock on doesnt everybody have their art smock on? :lol: :lol:


does it have pocker dots?

or pink and white squares?

or white with flowers?

:shock:
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest