heim joints

Post by **NICK** » Wed Mar 12, 2003 7:10 pm

so where do i get them, i have tried a nut and bolt shop, truck parts store and suspension shops, and all to no avail.

NICK

Post by **NICK** » Wed Mar 12, 2003 7:15 pm

S/E QLD preferably.

Post by **ando** » Wed Mar 12, 2003 7:27 pm

Nick
If you only want an 'industrial" type try an industrial supplies place - otherwise call Sydney and get them to post.. Onall4 or GRP
Ando

Post by **OVERKILL ENG** » Wed Mar 12, 2003 8:55 pm

Nick I can freight them to you overnight if you know what size you are after.

Post by **ShortyMQ** » Wed Mar 12, 2003 9:17 pm

You could try a bearing shop,that's where i got mine from

Wed Mar 12, 2003 9:29 pm

bearing shop or any engineering/ industrial supply shop should be able to get them.

If you want the good aircraft grade Linear Bearings is the place to get them form.

Post by **beebee** » Wed Mar 12, 2003 10:55 pm

Go to "Bearing Traders"!

There is one at slacks creek (I think) and geebung. I paid $23ea for 20mm ones. Much better than the $50-70 that CBC and one of the other bearing places wanted to charge me.

Post by **NICK** » Thu Mar 13, 2003 6:23 pm

ShortyMQ wrote:You could try a bearing shop,that's where i got mine from

tried that, 2 off them

NICK

Post by **RUFF** » Thu Mar 13, 2003 8:23 pm

Nick try GIBBS truck parts they should have them or know where to get them down the coast.

Post by **NICK** » Thu Mar 13, 2003 8:27 pm

tony, out of all the places i tried i thought them of all people would have had them, anyway, they have them on order but there prices seem to be exy.

Brent at wizards seems to be the best.

NICK

Post by **bj on roids** » Fri Mar 14, 2003 9:57 am

i was priced from general bearing co:

$27.50 including for the cheap ones
$87 including for the high tech or some chiat ones
$couple hundred for the aircraft grade ones

Post by **bubs** » Fri Mar 14, 2003 5:24 pm

CBC stock em

Outer Limits 4x4 Board

heim joints

heim joints

Who is online