Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Thrust bearing on a LT85

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Thrust bearing on a LT85

Post by Maggot4x4 »

It keeps making noise, box just rebuilt and been back twice for recto.

Any idea what would be causing this as I don't sit at the lights with my foot on the clutch.

Is it a regular problem with them and what would happen if I just left it?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 705
Joined: Thu May 13, 2004 7:29 pm

Post by daddylonglegs »

If it makes a noise when you apply pressure to the clutch pedal, but not enough to disengage the clutch it is a faulty thrust bearing.Does it only make a noise when you disengage the clutch fully? It may not be a faulty thrust bearing but a buckled clutch plate that sometimes happens when the fitters have difficulty lining the gearbox back up with the engine upon installation.
Bill.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

It's is only happening with the clutch out. The thing is it's is not happening all the time. It is quite intermittent.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Try adjusting the slave push rod (or is it cable?) to make sure it is fully disengaged.

Just to be clear, is the noise with the gearbox in neutral with your foot off the pedal?
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

up2nogood wrote:Just to be clear, is the noise with the gearbox in neutral with your foot off the pedal?


That is correct.

Will have a look tomorrow if it is cable or pushrod.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Could the noise be coming from the oil pump? With LT95 and LT85, it is on the front of the gearbox near the thrust bearing.
John
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

When I am idling at the lights I have a "clack clack clack..." type noise coming from the bellhosing area, that stops when I put my foot on the clutch. The boy was rebuilt just before I bought the truck and the clutch and thrust bearing were replaced. The noise hasn't changed over the time I have had the truck (30-40k km) and the clutch works perfectly with no shuddering or vibration.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

ISUZUROVER wrote:When I am idling at the lights I have a "clack clack clack..." type noise coming from the bellhosing area, that stops when I put my foot on the clutch. The boy was rebuilt just before I bought the truck and the clutch and thrust bearing were replaced. The noise hasn't changed over the time I have had the truck (30-40k km) and the clutch works perfectly with no shuddering or vibration.


This is identical to what I am hearing, with the identical senario, I have the recipts. And the clutch takes up fine. HMMMM
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 5 guests