Having recently bought a 1990 ford maverick xlt i thought i better strip it internally and rustproof check for rust etc.....
just wondering what the tubes are for which run down both kick panels, inside rear quarters and between the front and back??? are they for water drainage??
if so do the sills drain anywahere.... should i check the exit holes??
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Maverick body question
Howdy
I also have a SWB XLT Mav while you are checking it out check for stress cracks in the floor pan on both drivers and passenger side where the floor pan meets the fire wall. And also check at the base of the windscreen pillars for cracks look in the gap between the wiper panel and quarter panels.
Rossco
I also have a SWB XLT Mav while you are checking it out check for stress cracks in the floor pan on both drivers and passenger side where the floor pan meets the fire wall. And also check at the base of the windscreen pillars for cracks look in the gap between the wiper panel and quarter panels.
Rossco
Who is online
Users browsing this forum: No registered users and 3 guests