Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sierra clutch fan

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

sierra clutch fan

Post by built4thrashing »

is there such a thing as a clutch fan for a zook? will any other models fit without changing the water pump. do late model coilers have one??? dont wanna run thermos before ya go there.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

mine has a clutch fan :D

maby coz its coily

pritty sure you could get one from a coily
i thought your zook would have one
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

is a clutch fan the same as a viscous? then yes I have one and it should be as easy as changing the waterpump and fan over on a g13ba engine. why do you want one though?
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

are the water pumps different? would rather just change the fan and not the pump. will get less per loss with a clutch fan than with a fixed one. also allows enging to rev easier and a little quicker. plus i want to do water crossings and a clutch fan is the way to go
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 48
Joined: Wed Nov 06, 2002 1:49 pm
Location: Melbourne

Post by pjhsv »

built4thrashing wrote:are the water pumps different? would rather just change the fan and not the pump. will get less per loss with a clutch fan than with a fixed one. also allows enging to rev easier and a little quicker. plus i want to do water crossings and a clutch fan is the way to go


Why again is it that you don't want to run a thermo fan?...seems like it would completely solve all of your problems.....less loss than any other type of fan, and can flick a switch during water crossings.....car warms up quicker in the mornings too.
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

thermo fans are verry good had one on my zook but my old man wired it incorrect and it stoped working

only noticed when it was a real hot day stuck in traffic and coolant came out the over flow

but yeah when driving at speed the thermo wont even come on

and noticable power increase :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

pjhsv wrote:
built4thrashing wrote:are the water pumps different? would rather just change the fan and not the pump. will get less per loss with a clutch fan than with a fixed one. also allows enging to rev easier and a little quicker. plus i want to do water crossings and a clutch fan is the way to go


Why again is it that you don't want to run a thermo fan?...seems like it would completely solve all of your problems.....less loss than any other type of fan, and can flick a switch during water crossings.....car warms up quicker in the mornings too.


Yeah you can turn them off for water crossings but once you get water/mud in there they are stuffed. Clutch fan is the more reliable options IMO. I have a Vit 1.6 16v EFI and it came with a clutch fan.
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Damo wrote:once you get water/mud in there they are stuffed. Clutch fan is the more reliable options IMO.


Go to the top of the class Damo :)

Builtforthrashing, if you are a soft rooster, prissy boy and don't like to play in the mud, or you drive around dirty waterholes, go the thermo, but an engine driven fan will always be more reliable (always)
Peter.
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

droopypete wrote:Go to the top of the class Damo :)


Do I get a gold star? :lol:
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

I've got one off a vitara here if someone wants to bribe me with some beer.
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

yes droopy i like mud thats why i dont wanna go the thermo fan set up. with any fan they dont do anything above about 40km/h. id just perfer a thermo to the fixed fan.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

built4thrashing wrote: with any fan they dont do anything above about 40km/h. id just perfer a thermo to the fixed fan.


Oh yes they do.

Disconnect the fan and go for a drive. It will overheat even over 40 kph.

Clutch fans have a electric clutch like an A/C compressor and are pretty much the best of both worlds. Not many cars have them though, although I know that most late model Mercs have them.

Viscous fans are very very much a black art. They are "calibrated" with about 1,000,000 different grades of silicone flud and I reckon that a coiler fan, wouldn't work properly on a brass radiator sierra.

I have done a fair bit of work on a 1.6 converted sierra with a viscous fan, and I don't think it works properly on a sierra radiator, even with a shroud. ( i.e it gets hot on the highway)

Viscous fans can be touchy too. My Gwagen one leaked all of the fluid out (not the only one I know that has done t his) If they cool right down, (i.e in deep mud) they lock up and will still destroy the radiator/itself.

sorry that this is not all helpful, but viscous fans are far from perfect.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Gwagensteve wrote:I have done a fair bit of work on a 1.6 converted sierra with a viscous fan, and I don't think it works properly on a sierra radiator, even with a shroud. ( i.e it gets hot on the highway)


I have never had a cooling problem with my G16B with viscous fan and sierra 1.3 radiator (with shroud).
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Gwagensteve wrote:
built4thrashing wrote: with any fan they dont do anything above about 40km/h. id just perfer a thermo to the fixed fan.


Oh yes they do.

Disconnect the fan and go for a drive. It will overheat even over 40 kph.

Clutch fans have a electric clutch like an A/C compressor and are pretty much the best of both worlds. Not many cars have them though, although I know that most late model Mercs have them.

Viscous fans are very very much a black art. They are "calibrated" with about 1,000,000 different grades of silicone flud and I reckon that a coiler fan, wouldn't work properly on a brass radiator sierra.

I have done a fair bit of work on a 1.6 converted sierra with a viscous fan, and I don't think it works properly on a sierra radiator, even with a shroud. ( i.e it gets hot on the highway)

Viscous fans can be touchy too. My Gwagen one leaked all of the fluid out (not the only one I know that has done t his) If they cool right down, (i.e in deep mud) they lock up and will still destroy the radiator/itself.

sorry that this is not all helpful, but viscous fans are far from perfect.

There is truth in what you say Steve, but I would have a viscous coupled fan ahead of a thermo any day, (but I like the sound of a magnetic clutch, except it would surely have to be heavy, therefore sap a lot of power?)
Peter.
Posts: 1732
Joined: Sun Jan 19, 2003 6:12 am
Location: Roof, side, end, sometimes wheels

Post by ljxtreem »

2 plus'sz 4 a thermo is u can turn it off, and it takes some load off our tinny engines, but for reliability,
if the fan stops, so does your car


Mock
My photographic Art http://www.redbubble.com/people/ljxtreem

www.dirtcomp.com.au

Sierrajim wrote:
So hurry up, come back, buy a Lada (can't believe i just said that) and we'll go wheelin'.
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

coil sierra,swift,vitara will all fit onto the sierra water pump...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

sweet thanx mud4b
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 1819
Joined: Wed Jul 21, 2004 1:48 am
Location: Sunny Coast

Post by munecito »

The one that comes from a Jimny too.

Will
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

i thought the holes were too close on the jimny ones but i havent checked
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 1819
Joined: Wed Jul 21, 2004 1:48 am
Location: Sunny Coast

Post by munecito »

I have a friend in the club who has a fan cltch from a Jimny. He said it sits a little bit further in the shred but is just a couple of mm.

BTW. He also said it is a bolt in.

Will
Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests