Can the early LT 95 transfer case used on early Rangies(1983 models and earlier) be retrofitted on a 96 Disco I to increase crawl ratio? how about the defender transfer case?
Any update on the dual transfer case set up?
Thanks
JAY
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fitting LT 95 transfer case to a Disco
Moderator: Micka
Fitting LT 95 transfer case to a Disco
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
The LT95 is an integral box and T-case, and the low range is the same as the LT230 (3.32:1), only the gearbox ratios are different.
Maxi-Drive has a 30% lower low range for the LT230.
There should be a bolt on underdrive available eventually using the BW1339 jeep T-case - Search.
Maxi-Drive has a 30% lower low range for the LT230.
There should be a bolt on underdrive available eventually using the BW1339 jeep T-case - Search.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 5 guests