Guys, as the other night was my first real look under and around a MQ, and even a nissan for that fact, i didnt actually have that good a look that i could work out what the round cylinder type linkage that hangs down up the front in the middle of the two front spring hangers...
Im guessing some kinda steering linkage, but coming from a toyota side of things, ive never seen anything like it...
any one fill me in?
Lee.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Linkage on front of MQ???
called a relay box. Keep the grease up to it otherwise the bush flogs out, as it will eventually. Turn the wheel & have someone check the amount of movement. If to much put a new bush in it. Also if you can find one of a leaf sprung GQ they are the same and the shaft will most likely be in better nick
Cheers
Cheers
muddyperils wrote:How do they steer without this link setup , have seen many SPOA setups running a straight rod directley to the other knuckle????
My MK is SOA and the extra linkage is removed. Works just fine.
Some pics:
As you can see, the drag-link goes strait from the steering box to the steering arm.
/Magnus
Ps. And yes, i will add a steering damper!
I have it in my garage!Nissan Patrol MK SD33 -84
im wondering how u managed to un 3 leaves in the front without them frowning.
Mine frown even with 4 in the front.
BTW, great job pulling the old draglink off
Angle grinder and ducktape
screwy
Mine frown even with 4 in the front.
BTW, great job pulling the old draglink off
Angle grinder and ducktape
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
ozy1 wrote:Screwy_ScrewBall wrote:Angle grinder and ducktape ----spelt duct tape---- :?
screwy
mate, looks like masking tape to me, which is even worse than duct tape
Actually, it IS masking tape! However, i didn't have a tool for removing the bastard at the moment. Now it's gone however. I took the pic rigth after i finished the front steering job. I never drowe it on the road in that condition!
The X's... Did you mean thoose X's:
The problem was due to problems at my ISP, fixed now.
/Magnus
Nissan Patrol MK SD33 -84
Who is online
Users browsing this forum: No registered users and 13 guests