Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Double pulley

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Double pulley

Post by duncan »

Guys which modle car could i get a double pulley of so that i can either run a compressor for air or a power steering pump from to go on crank i would think
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

Or a supercharger? :D

Would have thought you could get one made up if you can't find one.
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

boleno 1600/1800
www.bbmotorsports.com.au
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

my G13B import engine has one, its probably swift/barina, but its the multi v type, like on vits, I believe....mines going to power the steering one day..christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

COIL SIERRA,SWIFT,JIMNY,VITARA,CARRY,BALENO..

ALL WILL FIT A G13... :D
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Thanks guys now dose anyone have one they are willing to sell as i just picked up my power steering for the project car just need that pulley now
Top
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

what type do you need v or ribbed , what type of p/s setup did you get ?
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Looking for a vee pulley still got to check out wether ive got a 4 or 5 bolt pully .The power steering i got was of a ZL fairlane pump and box for $60 in good condition should beable to mount the pump on the passenger side and either use the falcon tie rod or knock it out and go for a rod end with a bolt through it got to make cross over arm to bolt to top of swivel hub to keep the drag link nice and flat.

I am looking for a speedo head to suit my car and a 5 speed as second gear syncro is notchy or at least some one who can rebuild a box as its the one thing i have never done
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests