Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Info on 2.6l starter motor needed

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Info on 2.6l starter motor needed

Post by Drift Technician »

Guys need a new starter motor for the Paj and have come across a slightish problem. I need to know if it is a gear reduction drive starter motor or not?
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

DT

FWIW, I don't have a 2.6 in a Paj, but I've got one in a Sigma. Its starter motor doesn't have any reduction gears; direct drive of the gear which engages the flywheel.

Does that help?

Cheers,

Scott
Top
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Post by Drift Technician »

well I had one in the Paj which was stuffed, pulled it out was a different size to the spare one i had (longer but snout and gears were the same length/number) so installed that started for a week or so (alebiet cranky) then bought one from Mitsy wreckers today out of a 2.6l Paj and fitted it. Problem with the old one was that the snout was snapped off jamming the flywheel........ so not sure if they run the same starter motor
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest