Weights of parts

Post by **nicbeer** » Thu Dec 02, 2004 7:37 pm

gday

Can someone give me a weight of a 1ltr late xfer case? for freight purposes.

Post up any other weights as I'm sure everybody will benefit.

thanks

Post by **-Mick-** » Thu Dec 02, 2004 9:02 pm

dude I took it to my other work tonight but the scales don't go over 10kg :roll:

So yeah if anyone knows the weight that'd be good :lol:

Post by **nicbeer** » Thu Dec 02, 2004 9:21 pm

doh.

Bump

Post by **stumped** » Fri Dec 03, 2004 8:35 am

mud4b told me a 1.3L with 5.14 calmini's in it weighs 20kg with oil in it... guessing the 1L wouldn't be toooooooo far off that

incidentally, was around $30 to auspost (4-6 days) from brissy to newcastle

Post by **lay80n** » Sat Dec 04, 2004 10:29 am

Try searching, Daryl posted up a heap of weights a while ago. Might help ya. I cant search (using olds computer and its farked) so cant give ya a link.
Layto....

Post by **CRUSHU** » Sat Dec 04, 2004 10:55 am

I sent NT diff parts a while back. I sent a diff centre and the short axle (rear) in 1 package, @ about 20kg
sent the other axle and the drums in another pack, also @ 20kg.

there is a 20kg limit thru Australia post. it is about $20 - $25 between the eastern states, and upto $35 to perth.

Use your bathroom scales to weigh stuff. fairly accurate, and everyone has one. use a rag so you don't get it dirty

or the missus will kill you :!:

Post by **toysuzi** » Sun Dec 12, 2004 9:47 pm

zook parts

1.3l transfer case with mounts/cross members/ shifters 25kg
1.3l gearbox with gearshift + boot etc 25kg
complete 1.3litre engine 85kg
complete rear diff with springs/shock/brake lines etc 85kg
complete front diff with suspension/steering etc 105kg

i got bored one day waiting for funds to build the toysuzi
so that explains the time spent weighing spares

hope that helps

daryl

Post by **HRZOOK** » Mon Dec 13, 2004 7:21 am

daryl wrote:zook parts

1.3l transfer case with mounts/cross members/ shifters 25kg
1.3l gearbox with gearshift + boot etc 25kg
complete 1.3litre engine 85kg
complete rear diff with springs/shock/brake lines etc 85kg
complete front diff with suspension/steering etc 105kg

i got bored one day waiting for funds to build the toysuzi
so that explains the time spent weighing spares

hope that helps

daryl

I think you just ate a zook encyclopedia

HRZOOK

Post by **stumped** » Mon Dec 13, 2004 9:17 am

stumped wrote:mud4b told me a 1.3L with 5.14 calmini's in it weighs 20kg with oil in it... guessing the 1L wouldn't be toooooooo far off that

incidentally, was around $30 to auspost (4-6 days) from brissy to newcastle

this ended up being right... it's on it's way down now :cool:

1L should be same or less i guess

Outer Limits 4x4 Board

Weights of parts

Weights of parts

zook parts weight

Re: zook parts weight

Who is online