Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

34's on Vitara?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

34's on Vitara?

Post by SAWZALL »

How much would I have to lift a Vitara to fit 34 Simex's?

I understand that the Simex's are large for their size (if that makes any sense)

Any input would be appreciated....
Gone drag racing......
Top
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

.klnhdndfgz

Post by SiKiD_01 »

gonzo did a fair bit of cutting to fit his 33"s on his vit.

too much lift isn't good for a vit, unless you go SAS and then anything is possible.
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

Funny you should mention that

How about 34's on a Vit with no lift?

http://craig.4wdpics.com/tricky/
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

i think u will fins sawzall = chuck = uphiir :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

check out the November and December issues of petersen's.. they have photos of a 2 door vitara (sidekick) on 35x13.5 krawlers... they look like they fit neatly in there. that should give you an idea about what will and won't fit.
DMA Founding Member #1 - Now Retired
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

greg wrote:check out the November and December issues of petersen's.. they have photos of a 2 door vitara (sidekick) on 35x13.5 krawlers... they look like they fit neatly in there. that should give you an idea about what will and won't fit.


SAWZALL is uphiir ( waas goin to build the tim hardy replica)

SAWZALL owns the vit that gonzo posted

so to answer your question chuck u dont need no lift just a sawzall :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

redzook wrote:
greg wrote:check out the November and December issues of petersen's.. they have photos of a 2 door vitara (sidekick) on 35x13.5 krawlers... they look like they fit neatly in there. that should give you an idea about what will and won't fit.


SAWZALL is uphiir ( waas goin to build the tim hardy replica)

SAWZALL owns the vit that gonzo posted

so to answer your question chuck u dont need no lift just a sawzall :D



GEEZ your a spoils sport :roll:
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

run no guards and remove the firewall and ya can fit 44's*
























































*i am drunk so take no responsibility for broken cv's and axles...........the pos standard vitara gear cant even handle 30's, so 44's might be pushing the friendship ;)
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

The standard vitara gear can handle 30"s... thats a bit harsh....

Just cos it broke on 30"s cos you were abusing it earlier on 32"s doesnt count

:P
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

good tag-team effort going until tim ruined it :P


are those pics current, or is it finished? i wanna see some pics outta the workshop!! :cool:
how ya turning them, got gearing?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

Those pics are about a week and a half old...
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

not much had changed when i left friday night cept there was some dodgy welds begin laid
www.overkill4x4.com
ph 94766137
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

:D

should be on the road later this week, if I can get up there to finish it :cry:

and it has 20mm spring spacers in the front, so it is lifted :?

When it is SAS'd I will lower it back to standard and run 35 Centipedes
Gone drag racing......
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Two things come to mind when I read this thread.

One is POP the other is the sweet smell of a burnt clutch!

I like the additional floor air conditioning. For a better flow you just wind the window down a fraction.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

DeWsE wrote:Two things come to mind when I read this thread.

One is POP the other is the sweet smell of a burnt clutch!

I like the additional floor air conditioning. For a better flow you just wind the window down a fraction.


me thinks he is replacing the vit transfer with a sierra case with rockhoppers
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Yes can't see me going very far off road until SAS and Sierra transfer...

Oh and the "vents" have been attended to......wouldnt brag about the welding but they have been sealed...sort of....
Gone drag racing......
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

despite the small lift on the front, did you end up having to cut and remake the front body mount?
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

No but the steering doesn't have as much lock as it used to. Tyres were hitting chassis which I wasnt as eager to cut :?
Gone drag racing......
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

SAWZALL wrote:No but the steering doesn't have as much lock as it used to. Tyres were hitting chassis which I wasnt as eager to cut :?


Whats the backspacing on the rims
yeshemesh
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Dont know about the backspacing.

NOTE: Whilst the vehicle is at OVERKILL, all welding (so far) is the result of my own feeble attempts. Any structural welding will be done by SAM, which will probably be TIG and of VERY high quality :cool:
Gone drag racing......
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Don,t rockhopper Make a 6-1 for the vit case ?
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

yes, but it has no high range reduction

a serria with a s3 is much more useful
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Gonzo wrote:yes, but it has no high range reduction

a serria with a s3 is much more useful


I C , Do you still run the 5.12 gears in the diffs with the sierra transfer ?

be a bit screemy on the freeway ? series 3 is 1.7 in high range ?

Just wondering :)

Larry
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

I would have thought a standard sierra tcase be almost good enough if you've kept the 5.12 diffs... it's still about 27:1 in high and 42:1 in low.

Even taking into account the 34"s that's lower than stock sierra gearing by a fair bit both high and low range - too much in high range.

Of course if you're swapping diffs anyway then you may be able to drive it on the highway with the s3.
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

I think that S3 + 5.12 with real 34's will work out alright.....time will tell tho
Gone drag racing......
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

SAWZALL wrote:I think that S3 + 5.12 with real 34's will work out alright.....time will tell tho


I'm running S3 with 4.1 and 34s and am about 3800 at 100km/h. Droopypete has the S3 and 5.12s I think and his 1.6 is screaming along at around 4500 I think with his 33s
Ransom note = demand + collage
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

SAWZALL wrote:I think that S3 + 5.12 with real 34's will work out alright.....time will tell tho


Sam ran this with 37's....is your maths right?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 79
Joined: Fri Nov 08, 2002 8:23 am
Location: Melbourne

Post by Rut Slut »

im runin 34 simexes on my 89 vit the gearing isnt 2 bad. but 2weeks ago i snapt my front axl,diff housing in half and right hant cv in one hit iv got 2 inch body any 3 inch shocks u will need a angel grinder and a hammer though ;)
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

No just a...........................
























SAWZALL!!!!!!!!!!

BTW, Do you have photos of your Vitara?
Gone drag racing......
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

Liar :P

I've seen what you've done :cool:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 106 guests