I own two Patrols MK, one for street use (3.3 td) and one only for off road use (2.8 td), and I'm planing to put an Ford 305 V8 engine in the Patrol that I us only for off road.
And now this is my question will a tranny from a Patrol equiped with a RD28T engine survive the horse power of a V8 engine. Is the clutch strong enought. This Patrol is SOA and have 36" mud tires.
Did anybody try to make this swap before? [/img]
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ford V8 with RD28T trans?
the RD28T gearbox is the equivalent of the 300zx gearbox - not that strong.
It may be too small as well as its alloy.
I converted my RD28T engine and gearbox for a bigger patrol TD42 with the gearbox to suit.
Pic of the compared gearboxes for u...
Id try to find a TD42 gearbox or just use a TH700 with an adapted transfer case to run behind the ford v8.
TOM
It may be too small as well as its alloy.
I converted my RD28T engine and gearbox for a bigger patrol TD42 with the gearbox to suit.
Pic of the compared gearboxes for u...
Id try to find a TD42 gearbox or just use a TH700 with an adapted transfer case to run behind the ford v8.
TOM
GQ wrote:I converted my RD28T engine and gearbox for a bigger patrol TD42 with the gearbox to suit.
TOM
Hey TOM, I currently have my GU RD28tdi in getting a conversion to a GU TD42T engine. Did you have to move your chassis engine mounts? The guy doing mine had to move the right forward 30mm and the left back 30mm so that the TD42 could be mounted.
Regards
David
engine mounts were moved.. not chassis.
I used the current 2.8s engine mount on the 4.2 engine and bolted on the left side on the chassis no dramas.
the right side.. was a problem.. i put a plate behind the engine mount on the motor itself and welded the new engine mount into place and bolted it on to the chassis
Hope that helps
TOM
I used the current 2.8s engine mount on the 4.2 engine and bolted on the left side on the chassis no dramas.
the right side.. was a problem.. i put a plate behind the engine mount on the motor itself and welded the new engine mount into place and bolted it on to the chassis
Hope that helps
TOM
Who is online
Users browsing this forum: No registered users and 3 guests