Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Doh !!

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Doh !!

Post by moose »

you know that feeling ....
that "OH SH!T" , type feeling !!!! :?

left for work last nite , about 10:20 !!
pulled out the driveway , sort of "clunk" in the steering !! :?
took off up the road , thinking "Ah , will look at that 2moro !!"
1st corner I got too , T junction , traffic lights ...
lights have just gone amber , " its sweet , i,ll make it !!"
turned the wheel , lotsa times , car went half way round the corner , then straight !!! :cry:

straight into a pole !!!! DOH !!

just glanced the bullbar ,
& down the drivers side , so I flattened the only {semi}straight flare I had left !

& bent the crap out off the steering arms !!

Cause of the DOH !! , a bolt fell out of the rag joint !!
No prior warning , until I went to go too work !!

so now it is held together with a trailer chain "D" shackle !! :oops:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Yikes!!!!!!!! :shock:

Glad you made it out of that one Moose! And that you didn't take anyone/thing else out at the same time!!!

BTW, I think you might need to look at some preventative maintenance mate :cool:
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

I was in the engine bay on the weekend , did a headgasket !! (again !!)

3 bolts are still tight , only 1 fell out ???

there were no warning signs , apart from the noise as I left 4 work !!

I had been out driving around , during the day ! :?
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

moose wrote:I was in the engine bay on the weekend , did a headgasket !! (again !!)

3 bolts are still tight , only 1 fell out ???

there were no warning signs , apart from the noise as I left 4 work !!

I had been out driving around , during the day ! :?


Gremlins :lol:

P*ss that rag joint off and put a u-joint in there.

Go power steer while you're there :cool:
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

yeah , wanna do that !!
but all the one,s at work are a tad LARGE !!!

But ya get that with KW !! :D
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

Whilst there was panal damage, you gotta be STOKED that the damage/injury rate wasn't dramatically worse.......buy a lotto ticket ;) :D
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

moose wrote:yeah , wanna do that !!
but all the one,s at work are a tad LARGE !!!

But ya get that with KW !! :D


Zooks have 1 uni joint just near the firewall. Just get another one of them. Works good!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Hey Damo.

Is the other uni joint on the steering as well?

What is needed to convert the rag to this and also would this suit a BL as well.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

nicbeer wrote:Hey Damo.

Is the other uni joint on the steering as well?

What is needed to convert the rag to this and also would this suit a BL as well.

cheers


I just replaced the rag joint with one of those u-joints. I have a Vitara P/S box but I am pretty sure the spline on the Sierra box is the same.

You will need to make some changes to the end of the steering shaft as it has a flange on it and you need a spline to match up with the u-joint.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Quick one. If only 1 bolt fell out how did it make it fail. I though they are held by one at each corner??

Or am i wrong.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

2 bolts per side of rag joint , one falls out allows shaft to free spin around bolt left on side the bolt fell out off (make sense)
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests